VersaGuard™ with InnerCrete™ Membrane Technology

Versaguard42

Permanent, internal waterproofing, protection and durability for concrete and cementitious substrates.

Designed to provide maximum concrete waterproofing and protection for applications where surfaces will be painted or coated and optimal coating adhesion is required.

VersaGuard™ chemically modifies the concrete to create a permanent, integral and consistent waterproofing membrane from 2mm to 4mm below the surface.  The surface profile is maintained, so can be painted or coated with optimal adhesion or left with its natural finish.  VersaGuard provides complete waterproofing protection and versatility and eliminates the need for traditional sealants or coatings.

VersaGuard™ will increase the performance of concrete and other Portland-cement-based materials by:

  • Waterproofing and preventing water penetration
  • Moisture mitigation and sub-floor preparation
  • Hydrostatic pressure resistance in underground applications
  • Dramatically improve the durability, service life and longevity of high-traffic concrete areas
  • Increasing resistance to surface abrasion and erosion
  • Controlling efflorescence
  • Reducing dusting, spalling and deterioration
  • Reducing effects of freeze/thaw cycles
  • Reducing hairline cracking
  • Minimizing the impact of environmental factors
  • Minimizing the impact of salt and chemical attack
  • Inhibiting mold and mildew impact
  • Better protection against oil, stains and odors (simplifying maintenance)
  • Easy, spray-on application
  • Apply to damp or dry concrete
  • For use on bare, untreated concrete or cement-based materials
  • Effective on all green, new and existing, indoor and outdoor, above and below-grade applications.
  • Protects concrete at ≤12 pH, <12MVER, and 99% RH or greater
  • Compatible for use with almost any other secondary treatment designed for concrete

Apply by low pressure pump sprayer to clean, bare (damp or dry) concrete or cement surface.  Allow to soak into the surface using a stiff bristle broom agitate the product into the substrate.  Do not allow any product excess to pool and harden on the surface – wipe away before this occurs.  Allow to react for at least several hours before going back into use applying a subsequent treatment.

Coverage

150-250 square feet / 1 US Gallon

**Application rates are highly dependent on age, conditions and porosity of the concrete.  Do not allow excess product to pool and harden on the surface.

Available Sizing

5 US gallon pail
1US gallon pail

VersaGuard™ is ideal for moisture mitigation and surface preparation prior to painting, coating, sealing or other flooring treatments.  After treatment, the concrete is improved over time by;

  • reducing RH by 10% (or more)
  • reduces alkalinity and regulates pH levels
  • reducing MVER by 5+ lbs
  • retains surface compatibility for any type of future treatment designed for concrete

VersaGuard™

Concrete waterproofing, protection & moisture mitigation.

This information is a brief overview only. Please refer to the TDS (Technical Data Sheet) for complete use and application instructions.