DeTAG™
An effective, eco-friendly cleaner used to remove graffiti, marker, tags, paint/overspray, adhesives, scuff marks, grease and lipstick off of painted, non-porous surfaces and some delicate surface. It will not damage the underlying surfaces and when used correctly on painted surfaces, it will not remove the underlying paint. Comes ready to use.
It’s as easy as:
- Apply by spray
- Wait 10 seconds to 5 minutes (Always start with shorter dwell times
- Wipe off marker, tags and graffiti
When used to remove graffiti on concrete surfaces first treated with UltraGuard™, the removal process is quick and easy and eliminates use of dangerous chemicals and aggressive abrasive methods. UltraGuard™, DeTAG™ and DeBOND™ (when needed) are part of a simple and effective Anti-Graffiti System for concrete and masonry surfaces.
- Concrete, masonry or other porous surfaces first treated with UltraGuard
- Graffiti & tag removal off painted surfaces
- Bus shelters, sneeze guards and COVID barriers (always test substrate suitability)
- Adhesive residues from tapes or glues
- Wooden park benches & seating areas
- Unwanted overspray on vehicles from painting projects
- Marker and felt off parks equipment and other HDPE substrates
- Stadiums, arenas & public areas
- Scuff marks off polished floors
- Brake dust from car wheels
- Grease, oils & lipstick marks off certain surfaces
- Eco-friendly
- Fully biodegradable
- Non-toxic
- Low odor
- Will not fog Plexiglass, Lexan or glass
- Will not damage most underlying paints
- Safe for use on most non-porous surfaces
- Comes ready to use
- Easy spray-on application
- Cost effective
- Part of effective Anti-graffiti System for Concrete when used with UltraGuard™ and DeBOND™
Apply DeTAG™ by:
- Spray directly onto affected surface
- Apply liberally
- Typical dwell time ranges from 10 seconds to 5 minutes (or longer- depending on substrate and material being removed)
- ALWAYS perform a test patch – especially on painted or delicate substrates
- Wipe off with damp or dry cloth
- Repeat if needed
When DeTAG™ used on surfaces first treated with UltraGuard, multiple removal procedures can be completed in the same area before reapplication of UltraGuard is required. Contact the Company for further information on the Anti-Graffiti System.
Coverage
150 – 250 square feet / 1 US Gallon
Available Sizing
1 US gallon pail – case of 4
5 US gallon pail
- Concrete, masonry or other porous surfaces first treated with UltraGuard
- Graffiti & tag removal off painted surfaces
- Bus shelters, sneeze guards and COVID barriers (always test substrate suitability)
- Adhesive residues from tapes or glues
- Wooden park benches & seating areas
- Unwanted overspray on vehicles from painting projects
- Marker and felt off parks equipment and other HDPE substrates
- Stadiums, arenas & public areas
- Scuff marks off polished floors
- Brake dust from car wheels
- Grease, oils & lipstick marks off certain surfaces
Dwell times range from 10 seconds to 5 minutes or longer depending on type of graffiti, length of time on substrate, type of substrate and temperature.
For old, stubborn or multiple layer graffiti longer dwell times may be required.
When removing off of latex-painted surfaces or delicate surface, test first to determine appropriate dwell time.
DeTAG™
Graffiti remover for painted & non-porous surfaces.
For use with UltraGuard treated surfaces.
This information is a brief overview only. Please refer to the TDS (Technical Data Sheet) for complete use and application instructions.
