DeBOND™ / AiA™
DeBOND ™ / AiA ™ – Industrial paint, coating, powder coating remover and lead-based paint remover. This water-based, spray-on / brush-on formula does NOT flash off and is ideal for large removal and lead-based paint removal projects.
AiA ™ is a faster acting, heavier duty version of DeBOND ™.
It’s as easy as:
- Apply by airless sprayer or brush
- Wait several hours to overnight
- Easily scrape off or pressure wash the lifted paint/coating
DeBOND ™ / AiA ™ uses proprietary, bond-breaking, encapsulation technology to penetrate through paint/coating layers, break the adhesion bond and safely detach the paint/coating from the underlying surface. This innovative removal technology ensures delicate surfaces are not harmed and allows for easy containment of removed materials. This is ideal for lead-based paint removal as the toxic paint is easily contained and disposed of.
DeBOND ™ / AiA ™ can be used on most indoor and outdoor and vertical and horizontal surfaces where paint/coating removal is required. This product is effective is removing multiple layers of paint/coatings, however, multiple product application and removal processes may be required. When using on delicate surfaces, such as wood, brick or sandstone, always test a small area first.
- Lead and Asbestos-based Paints (A-I-A)
- Powder Coating
- Latex Paint
- General Purpose Paints
- Acrylic Paint
- High-performance Coatings (Aerospace & Industrial)
- 2-Part and Fusion Bonded Epoxies
- 2-Part Urethane Materials
- Alkyd Paint
- Fully biodegradable
- Water-based material
- Contains no Methylene Chloride, Caustics or NMP
- Low odor
- Very effective in the removal of multiple layers of paint
- Will remove most high performance coatings and systems
- White in color to assist with coverage during application
DeBOND ™ / AiA ™ is applied by brush (small areas) or by airless sprayer (large areas). Rollers are NOT recommended. When spraying, DO NOT atomize the product. Refer to the TDS for required sprayer specifications. Surfaces must be clean and dry before application.
Fully cover the underlying substrate with DeBOND ™ / AiA ™. The color of the underlying paint/coating should not be visible when sufficient product has been applied. When applying by brush, use a dabbing motion to deposit product to the surface.
Once applied on the surface, protect from rain, intense heat/sunlight/freezing and interference. Do not scrub or agitate the product, do not allow to dry out – leave to dwell. Product will be visible working when the color darkens and the product begins to ripple.
Test patches should always be performed to determine adequate dwell time and product suitability. Dwell time is complete when the paint/coating has lifted and can be easily removed from the surface.
Coverage
80 square feet per US gallon
(Based on a 1 application process)
Available Sizing
DeBOND ™ available in:
1 US gallon pail
55 US gallon drum
AiA ™ available in:
2.3 Litre container
5 US gallon pail
55 US gallon drum
- For use on metal, concrete, fiberglass and most substrates
- For industrial, commercial & residential removal projects
- Ideal for lead-based paint removal projects – the contaminated material is easily collected
- For indoor / outdoor / confined spaces / sensitive environmental areas
- Water-based & fully biodegradable
- Quickly spray-on large areas, does not flash off
- Brush on small areas
- Safe and easy to use
- Eliminates toxic, heavy solvent chemicals
- Reduce lengthy labor removal costs
- Eliminates mechanical / abrasive removal methods that can release air borne toxins & damage substrates
DeBOND ™ / AiA ™ are water-based. Protect from extreme heat while in colder temperatures, longer dwell times will be needed.
DeBOND™ & AiA™
Industrial paint, coating, lead-based paint & powder coating remover.
